FSCL-1型移動式油水分離過濾機（刮油機、撇油機、浮油撈除機）能夠自動將漂浮在切削液表面的污油分離出來，并將切削液過濾。使其延長刀具使用壽命，提高零件光潔度，極大地延長切削液的使用壽命，減少了機床停工時間。

 

特點：

1、本機能夠自動將漂浮在切削液表面的污油分離出來，并將切削液過濾。使其延長

　 刀具使用壽命，提高零件光潔度；

2、有效降低油煙和氣味；

3、極大地延長切削液的使用壽命，減少了機床停工時間；

4、大大降低切削液的采購和清理成本；

5、專有的無需更換的油水分離聚結器；

6、緊湊型的浮子裝置，便于任何冷卻水箱安裝；

7、配備有盤式撇油機，自動將廢油排到收集桶內，袋式過濾器

　 可以使用戶自由選擇過濾精度（標準配置精度為25μ）。
8、可選移動或固定式

規 格：

    處理水量：   1 噸/小時

  效    率：   95%

  功    率：   電動泵   25W+ 290W   220V

  壓縮空氣：   4-6 公斤/平方厘米

  尺    寸：   900X550X900 mm

工作周期：

1、使用油水分離過濾機對每臺機床冷卻水箱工作3～4小時，而后轉到下一臺機床；

2、建議每臺機床的冷卻水箱每周循環過濾一次；

3、油水分離過濾機每班可分離過濾2臺機床冷卻水箱或每周單班10臺機床冷卻水箱。

 

操作方法：

1、使用時將浮子放入冷卻水箱中油污集中處漂浮在冷卻液表面；

2、將回水管放入冷卻水箱出水口處；

3、給油水分離機通電（撇油機220V/25W+水泵290W）工作；

4、油水混合液通過浮子抽進袋式過濾器（精度25μ）過濾，再通過水泵（或隔膜泵）抽到油水分離器內進行油水分離，干凈的冷卻液返回到冷卻水箱內，污油被隔離，通過盤式撇油機將污油排到廢油收集桶內。

 

 

Fscl-1 mobile oil-water separation filter can automatically separate the oil floating on the cutting fluid surface and filter the cutting fluid. Make it prolong tool service life, improve parts finish, greatly extend the cutting fluid service life, reduce the shutdown time of the machine tool.

 

Features:

 

1. The machine can automatically separate the oil floating on the surface of the cutting fluid and filter the cutting fluid. Make it extend

 

Tool service life, improve the parts finish;

 

2. Effectively reduce lampblack and smell;

 

3, greatly extend the cutting fluid service life, reduce the shutdown time of the machine tool;

 

4, greatly reduce the cutting fluid procurement and cleaning costs;

 

5. Proprietary oil-water separation aggregators that do not need to be replaced;

 

6. Compact float device for easy installation of any cooling water tank;

 

7. Equipped with disk-type oil skimmer, the waste oil will be automatically discharged into the collection barrel and the bag filter

 

Allows the user to select the filtering accuracy (standard configuration accuracy of 25).

 

Rules:

 

Water volume treated: 1 ton/hour

 

Effective rate: 95%

 

Power rate: electric pump 25W+ 290W 220V

 

Compressed air: 4-6 kg/cm2

 

Inch: 900x550x900mm

 

Working cycle:

 

1. Use oil-water separation filter to work the cooling water tank of each machine for 3-4 hours, and then transfer to the next machine;

 

2. It is suggested that the cooling water tank of each machine be cycled and filtered once a week;

 

3. Oil-water separation filter can separate and filter 2 machine cooling water tanks per shift or 10 machine cooling water tanks per week in a single shift.

 

 

 

Operation method:

 

1. When using (when using diaphragm pump, access to compressed air), put the float into the oil concentration in the cooling water tank and float on the surface of the cooling liquid;

 

2. Put the return pipe into the outlet of the cooling water tank;

 

 

3power to oil and water separator (oil skimmer 220V/25W+ water pump 290W) work;

 

4. The oil-water mixture is pumped through a float into a bag filter (accuracy 25) for filtration, and then pumped through a water pump (or diaphragm pump) into an oil-water separator for oil-water separation. The clean coolant returns to the cooling water tank, and the oily oil is isolated.